500ml PETG Square Media Bottles

 500ml PETG Square Media Bottles

Product Description

 500ml PETG Square Media Bottles 

Sufficient inventory, Short Delivery Time, New Price, High Cost Performance! Your Best Choice!

If you want to get free samples and any other question, please leave a message or send an email to contact us!

500ml Square Media Bottles are mainly used for storing and sampling active pharmaceutical ingredients, bulk intermediates, and also for preparing, storing buffers, culture.solutions or long-term storage of pH sensitive liquids.

It can be used to store reagents but cannot be used as heating vessels.

 Features  

  • Type: 250/500/1000ml.
  • Material:PET/PETG
  • Production Environment:C-GMP 
  • Sterilization:60co-γ irradiation SAL=10, Non-Pyrogenic, Dnase & Rnase free.
  • The bottle body is square, easy to hold, easy to store. The surface is smooth and shiny, easy to clean, not easy to leave residue.
  • Good chemical resistence 
  • Low temperature resistence: -70 

Product Number

Specification

Textures

Neck DIA(mm)

High(mm)

 

PCS/pack

PCS/box

C080500

500ml

PET

35.4

172.5(Without cap) 176.5(With Cap)

40

120

C081500

500ml

PETG

35.4

172.5(Without cap) 176.5(With Cap)

40

120

  •  FAQ: 
  • 1. Q: Is there a product batch number identification for traceability?
  • Answer: There is a product batch number label, which can be traced back to each day.
  • 2. Q: What is the material of the hydrophobic membrane of the breathable cover? diameter?
  • Answer:We adopt a double-layer composite membrane design (PTFE sterilizing filter membrane, PP support membrane), and the water pressure resistance
  • is above 0.35Mpa. Diameter/mm 25.70±2.00.
  • 3. Q: Sealing test method
  • Answer: Put the cell bottle into the water under one meter, pump at pressure 35Kpa, the product does not leak


评论

发表评论

此博客中的热门博文

Two commonly used materials for carboys

图片
  In biological experiments, the processing and preservation of some liquids are often involved.   Carboys   are ideal for storing sterile liquids, distributing solutions and culture media. The commonly used specifications are mainly 10L and 20L. The material of this container are two main types: PP (polypropylene) and PC (polycarbonate). Polypropylene: It is a polymer formed by the addition polymerization reaction of propylene. The operating temperature range is -30~140℃. It can resist the corrosion of acids, alkalis, salt liquids and various organic solvents below 80℃, and can decompose under high temperature and oxidation. Polypropylene is a thermoplastic synthetic resin with excellent properties. It is a colorless, translucent thermoplastic lightweight general-purpose plastic with chemical resistance, heat resistance, electrical insulation, high-strength mechanical properties and good high-wear resistance processing properties.   Polycarbonate: The liquid storage...
阅读全文

What characteristics do the culture media bottles need to meet?

图片
  The media is the basic substance that provides cell nutrition and promotes cell proliferation, and is also the living environment for cell growth and reproduction. There are many types of medium, the raw materials for preparation are different, and the requirements for use are different. What characteristics should the   media bottles   meet to ensure that the medium is well preserved? The general medium is easily contaminated or decomposed by bacteria after being heated and absorbing moisture. Therefore, the general medium must be kept in a cool and moisture-proof place. For some media (such as tissue culture medium) that need to be strictly sterilized, they must be stored in a refrigerator at 3-6 °C for a long time. To ensure good storage of the medium, the media bottle should meet the following characteristics: 1. Sterility: The medium bottle must be aseptically treated to ensure that the medium is not contaminated. The general sterilization method will choose electr...
阅读全文

Cause Analysis of Mycoplasma Contamination in Cell Factory

图片
  Mycoplasma contamination of cells is a very troublesome problem when culturing cells, especially in the use of large-scale culture vessels such as   cell factory . Once mycoplasma contamination occurs, the loss will be even greater. So, what is the cause of mycoplasma contamination? Mycoplasma is a prokaryotic organism with a size of only 0.2-0.3 um, no cell wall, and can pass through a general filter membrane (0.22-0.45 um). During cell culture, the incidence of mycoplasma infection reaches 63%, so during cell culture Contamination by mycoplasma is a worldwide problem. When cells (especially passage cells) are contaminated by mycoplasma, the expression of DNA, RNA and protein in the cells will change, but the growth rate of cells generally does not have a significant impact, so the contamination of cells by mycoplasma is generally difficult to detect. In most cases, the cytopathic changes are slight or insignificant, and subtle changes can also be alleviated by subculture a...
阅读全文