The production process of the cell factory

 A cell factory is a commonly used consumable in large-scale cell culture. Its structure consists of one or more layers, and the uppermost layer is provided with two perfusion ports. What process is used to produce such a complex structure?

The injection molding process adopted by the cell factory mainly includes the following steps:

①Pre-molding process:

The pre-molding process is that the plastic material is heated, transported, compacted, sheared, mixed and homogenized in the barrel to transform the material from a glass state to a viscous fluid state, so as to meet the injection molding requirements.

②Injection filling process:

In the injection filling stage, the screw injects the melt in the storage chamber into the cavity through the nozzle, the mold runner and the gate under the thrust of the injection cylinder.

③ Compression and compression process:

Continue injection molding to fill the volume vacated by the part due to shrinkage.

④Cooling and setting process:

After the holding pressure is over, the gate is frozen. The article undergoes a period of cooling and setting.

⑤ The process of ejecting and picking up:

After the product has been cooled for a period of time, it has a certain rigidity and strength. The part is ejected from the injection mold by the ejector pin of the mold.

The filling port and the main body of the top layer of the cell factory are integrally injection-molded. This process can ensure that the product has better sealing performance and good strength. The above is the production process of the cell factory. In addition, the injection molding process is also suitable for the processing of polyolefin, polyamide, polyoxymethylene, polycarbonate and other materials.

评论

发表评论

此博客中的热门博文

Material features of PETG media bottles

图片
  PETG media bottles   are a special packaging for storing various media, reagents, serum and other solutions, and it is also a product that scientific researchers have more contact with. The wide range of applications is mainly due to the superior properties of its materials. PETG is a transparent plastic that belongs to the non-crystalline copolyester. Serum needs to be stored in a low temperature environment. The use range of this material is -80°C to 60°C, which makes PETG media bottles fully meet the storage needs of serum. In addition, it has the following features: 1. High transparency, the light transmittance reaches 90%, which can reach the transparency of plexiglass; 2. It has stronger rigidity and hardness, excellent scratch resistance, impact resistance and toughness, which is close to or even exceeds that of polycarbonate (PC), and is suitable for injection molding, extrusion molding and extrusion blowing processing; 3. In terms of chemical resistance, oil resistance, weat
阅读全文

What are the common specifications of serum bottles

图片
  In biological laboratories, we often have to store various solutions and reagents. Thanks to the advantages of good performance, transparency, and temperature resistance, serum bottles have become "frequent visitors" in the laboratory. As a commonly used storage container, what are its common specifications?                      FuDau 60ml-Square-PETG-PET-Media-Bottles Common materials for serum bottles include PETG and PET, both of which have very good temperature resistance and transparency. In comparison, bottles made of PETG have more advantages in terms of barrier properties. If you want to pursue a better storage state of the solution, it is recommended to use a bottle made of PETG. There is a molded scale on the body of the bottle, we can clearly observe the capacity and state of the solution. The common specifications of this kind of container include 5ml/10ml/30ml/60ml/125ml/250ml/500ml/1000ml, etc., which are mostly used to store serum, culture medium, buffer, dis
阅读全文

Cell factory requirements for production raw materials

图片
Cell factories   are mainly used for large-scale cell culture. Cells have high requirements on the environment, such as temperature, humidity, osmotic pressure, pH value, etc. Therefore, this kind of   cell   consumables also has high requirements on raw materials. The first is transparency. In the process of cell culture, it is necessary to grasp the growth state of the cells at any time, and make corresponding adjustments according to the cell proliferation. Therefore, the raw materials of the cell factory must meet the requirements of transparency, so that it is convenient for researchers to observe the growth of cells. The second is the compatibility of materials. The raw materials of this consumable generally meet the requirements of USP Class VI medical polymer materials. Medical polymer materials refer to polymer materials used to manufacture human internal organs, external organs, pharmaceutical dosage forms and medical devices, and their sources include natural biopolymer mate
阅读全文