250ml Square Media Bottles

 250ml Square Media Bottles 

Sufficient inventory, Short Delivery Time, New Price, High Cost Performance! Your Best Choice!

If you want to get free samples and any other question, please leave a message or send an email to contact us!

250ml Square Media Bottles are mainly used for storing and sampling active pharmaceutical ingredients, bulk intermediates, and also for preparing, storing buffers, culture.solutions or long-term storage of pH sensitive liquids.

It can be used to store reagents but cannot be used as heating vessels.

 Features  

  • Type: 250/500/1000ml.
  • Material:PET/PETG
  • Production Environment:C-GMP 
  • Sterilization:60co-γ irradiation SAL=10, Non-Pyrogenic, Dnase & Rnase free.
  • The bottle body is square, easy to hold, easy to store. The surface is smooth and shiny, easy to clean, not easy to leave residue.
  • Good chemical resistence 
  • Low temperature resistence: -70 

Product Number

Specification

Textures

Neck DIA(mm)

High(mm)

 

PCS/pack

PCS/box

C080250

250ml

PET

35.4

140(Without cap) 144(With Cap)

56

224

C081250

250ml

PETG

35.4

140(Without cap) 144(With Cap)

56

224

 FAQ: 

1. Q: Is there a product batch number identification for traceability?

Answer: There is a product batch number label, which can be traced back to each day.

2. Q: What is the material of the hydrophobic membrane of the breathable cover? diameter?

Answer:We adopt a double-layer composite membrane design (PTFE sterilizing filter membrane, PP support membrane), and the water pressure resistance

is above 0.35Mpa. Diameter/mm 25.70±2.00.

3. Q: Sealing test method

Answer: Put the cell bottle into the water under one meter, pump at pressure 35Kpa, the product does not leak

评论

发表评论

此博客中的热门博文

Material features of PETG media bottles

图片
  PETG media bottles   are a special packaging for storing various media, reagents, serum and other solutions, and it is also a product that scientific researchers have more contact with. The wide range of applications is mainly due to the superior properties of its materials. PETG is a transparent plastic that belongs to the non-crystalline copolyester. Serum needs to be stored in a low temperature environment. The use range of this material is -80°C to 60°C, which makes PETG media bottles fully meet the storage needs of serum. In addition, it has the following features: 1. High transparency, the light transmittance reaches 90%, which can reach the transparency of plexiglass; 2. It has stronger rigidity and hardness, excellent scratch resistance, impact resistance and toughness, which is close to or even exceeds that of polycarbonate (PC), and is suitable for injection molding, extrusion molding and extrusion blowing processing; 3. In terms of chemical resistance, oil resistance, weat
阅读全文

What are the common specifications of serum bottles

图片
  In biological laboratories, we often have to store various solutions and reagents. Thanks to the advantages of good performance, transparency, and temperature resistance, serum bottles have become "frequent visitors" in the laboratory. As a commonly used storage container, what are its common specifications?                      FuDau 60ml-Square-PETG-PET-Media-Bottles Common materials for serum bottles include PETG and PET, both of which have very good temperature resistance and transparency. In comparison, bottles made of PETG have more advantages in terms of barrier properties. If you want to pursue a better storage state of the solution, it is recommended to use a bottle made of PETG. There is a molded scale on the body of the bottle, we can clearly observe the capacity and state of the solution. The common specifications of this kind of container include 5ml/10ml/30ml/60ml/125ml/250ml/500ml/1000ml, etc., which are mostly used to store serum, culture medium, buffer, dis
阅读全文

Cell factory requirements for production raw materials

图片
Cell factories   are mainly used for large-scale cell culture. Cells have high requirements on the environment, such as temperature, humidity, osmotic pressure, pH value, etc. Therefore, this kind of   cell   consumables also has high requirements on raw materials. The first is transparency. In the process of cell culture, it is necessary to grasp the growth state of the cells at any time, and make corresponding adjustments according to the cell proliferation. Therefore, the raw materials of the cell factory must meet the requirements of transparency, so that it is convenient for researchers to observe the growth of cells. The second is the compatibility of materials. The raw materials of this consumable generally meet the requirements of USP Class VI medical polymer materials. Medical polymer materials refer to polymer materials used to manufacture human internal organs, external organs, pharmaceutical dosage forms and medical devices, and their sources include natural biopolymer mate
阅读全文